JKI-601 was developed as a highly thermal stable spin finish for PES tire cord and other industrial yarns. Since it can be applied neat or aqueous emulsion it is suitable for both two step and one step process like.
   - Spin Drawing Winding
   - LOY / Draw Twisting
   - LOY / Draw Winding
   - LOY / Warp Drawing

 

      1) well balanced fiber/fiber friction for excellent package formation
      2) fair dynamic lubricity
      3) low level of deposits on hot godets or hot plates
      4) low volatility and smoke propensity - approx. 240¡É
      5) good bundle cohesion
      6) excellent static protection
      7) good PVC adhesion and compatible with adhesion promoters
 

      Proprietary combination of highly stable esters, nonionic emulsifiers, anionic antistats and special additives.
 
ITEM
SPECIFICATION
Appearance Yellow brown, clear liquid
Active substance (AS) 94 ¡¾ 1.0 %
Viscosity (30 ¡ÆC) 270 ¡¾ 20 cps
Density (30 ¡ÆC) 1.0 ¡¾ 0.02 g/cm3
pH (1%) 7.0 ¡¾ 1.0
Emulsion viscosity (30¡ÆC) 15% AS: 2.5 ¡¾ 0.3 cps
30% AS: 8.4 ¡¾ 0.5 cps
 

      JKI-601 can be applied
                  - neat diluted with a suitable low viscosity mineral oil
                  - as a 13 ~ 18% aqueous emulsion
                     using kiss-rollers or a combination of a metering pump and a application jet

      The emulsion is prepared by slowly pouring JKI-601 into demineralized water at room temperature
       while stirring. The emulsion should be protected by a biocide.

                  Recommended emulsion concentration: 13% ~ 18 %
                  Recommended finish level: 0.8% to 1.5 %

      The finish level should be determined by extraction with petrolether/isopropanol 1:2.

 

      Storage stability : At least 12 months under normal conditions.

      Storage and transport : Recommend a storage temperature of 15~30 ¡ÆC
                                         Direct exposure to the sun should be avoided
                                         Product solidifies below 15¡É, but can be fully restored
                                         by warming to 30 ~ 40¡É and stirring.

      Further remarks : References to measurements in case of accidents and fires as well as further
                                information about ecology, toxicology, transport and storage are given in the
                                separate Material Safety DataSheet.

 

      NET 180Kg in Plastic Drum