JKT-106 is a suitable spin finish for PES flat yarns manufactured on conventional and high speed machines. It features an optimized combination of lubricity and low volatility. JKT-106 is suitable for 1-Step and 2-Step processes like.
   - LOY spinning followed by draw twisting or draw winding
   - POY spinning followed by draw twisting or draw winding
   - FDY (spin-drawing)

 

      1) good wetting properties
      2) no tendency to form gels on intermingling jets
      3) low dynamic friction, therefore suitable for weaving and warp knitting
      4) good bundle cohesion
      5) good static protection
      6) compatible with most sizes
      7) good thermal stability, for processing up to 180¡ÆC
 

      Combination of fatty acid esters, anionic antistatic agents and nonionic emulsifiers.
 
ITEM
SPECIFICATION
Appearance yellow, clear liquid
Active substance (AS) 91 %
Viscosity (25 ¡ÆC) approx. 91 cps
Density (25 ¡ÆC) approx. 0.927 g/cm©ø
Appearance of the emulsion milky, slightly transparent emulsion
pH value (1%) approx. 7.0
Emulsion viscosity (25 ¡ÆC) 10% AS: approx. 1.99 cps
30% AS: approx. 12.8 cps
 

       The emulsion of JKT-106 is prepared by slowly pouring into demineralized water at room
       temperature while stirring. The emulsion should be protected by a biocide.

                     Recommended emulsion concentration: 10% ~ 15%
                     Recommended oil pick up: 0.7% to 1.2%

       The finish level should be determined by extraction with petrolether/isopropanol 1:2.

 

      Storage stability : Shelf life under normal conditions is at least one year. We recommend a storage
                                temperature of 15 to 30¡ÆC. Direct exposure to the sun should be avoided.

      Storage and transport : Product can be changed at temperature below 10 ¡ÆC.
                                         Change reversible by heating and stirring

      Further remarks : References to measurements in case of accidents and fires as well as further
                                 information about ecology, toxicology, transport and storage are given in the
                                 separate Material Safety Data Sheet.

 

      NET 180Kg in Plastic Drum