| |
JKP-703
is used as a spin finish for polypropylene or polypropylene-bicomponent
staple fibres subsequently processed into geotextiles
and industrial nonwovens. High strengths are achieved
after needle punching. JKP-703 is also applied to spunbond
nonwovens. |
| |
 |
| 1)
medium to low dynamic fiber/metal friction
2) good antistatic
protection
3) provides
moderate fiber bundle cohesion
4) prevents
fogging and protects against corrosion
|
|
| |
 |
| Blend
of nonionic polyglycolesters and anionic antistatic
agents and nonionic emulsifiers.
|
|
| |
 |
ITEM |
SPECIFICATION |
| Appearance |
colorless(or light yellow) clear liquid |
| Active substance (AS) |
80 ”¾ 1.0 % |
| Viscosity (25 ”ĘC) |
158 ”¾ 10 cps |
| Density (25 ”ĘC) |
1.05 ”¾ 0.02 g/cm3 |
| Appearance of the emulsion |
nearly colorless, clear solution |
| pH value (1%) |
7.0 ”¾ 1.0 |
| Emulsion viscosity (25 ”ĘC) |
10% AS: 7.5 ”¾ 1.0 cps |
|
|
| |
 |
JKP-703
can be applied as an aqueous emulsion via kiss-rollers
or via spray.
Solution
may be prepared by addition of JKP-703 to demineralized
water of room temperature under
agitation.
Recommended
emulsion concentration:
for
spinning and drawing : each 1.0% ~ 3.0%
for
finishing : 7.0% ~ 12.0%
Recommended
oil pick up: 0.3% to 0.6%
The
finish level should be determined by extraction
with petrolether/isopropanol 1:2. |
|
| |
 |
| Storage
stability : Shelf life under normal conditions
is at least one year. We recommend a storage
temperature of 15 to 30”ĘC. Direct exposure to
the sun should be avoided.
Storage and
transport : Product can be changed at temperature
below 10 ”ĘC.
Change
reversible by heating and stirring
Further remarks
: References to measurements in case of accidents
and fires as well as further
information about ecology, toxicology, transport
and storage are given in the
separate Material Safety Data Sheet.
|
|
| |
 |
| NET
180Kg in Plastic Drum
|
|
| |
| |
| |
| |
